Click on the image to check the artwork
The non-pressure solar water heater is called the direct-inserting all-glass vacuum tube solar water heater. Because the vacuum collector tube and the water tank are sealed by the sealing rubber ring, they cannot withstand the pressure. Households generally use non-pressure solar water heaters. The water tank has a pipe that communicates with the atmosphere. It uses the height difference between the roof and the home to generate pressure when using water. Its safety, cost and service life are much more significant than the pressure type.
Â
|
Product name |
Compact non pressure solar water heater |
|||
|
Inner Tank Material |
Food grade SUS304 2B or SUS316L |
|||
|
Inner Tank Diameter |
Φ360mm;Φ370mm;Φ380mm;Φ420mm |
|||
|
Inner Tank Thickness |
0.31mm;0.38mm;0.41mmï¼›0.45mmï¼›0.51mmï¼›0.6mmï¼›0.7mm | |||
|
Outer Tank Material |
PVDF;SUS304;SUS316;Colorful plate |
|||
|
Outer Tank Diameter |
Φ460mm;Φ470mm;Φ480mm;Φ520mm |
|||
|
Outer Tank Thickness |
0.4mm 0.45mm 0.5mm |
|||
|
Tube Material |
Three-target All Glass Vacuum Tube |
|||
|
Vacuum Tube Size(mm) |
58/1800 (diameter/length) |
|||
|
Tube Number |
8/10/12/15/18/20/24/25/30/36/36/40/42/45/48/50 |
|||
|
Solar absorbance α |
≤93%≤96% (MS) |
|||
|
Frames (Stand Parts) |
Galvanized plate, Stainless steel or Aluminum alloy |
|||
|
Insulation Layer |
High quality polyurethane foam made by advanced high pressure foam machine |
|||
|
Insulation Thickness |
50mm,55mm,60mm |
|||
|
Foam density |
40kg/m3 |
|||
|
Material of tank cover |
Galvanized steel/Stainless steel |
|||
|
Holes of tank |
Water inlet /Water outlet/Air vent/Assistant tank--------3/4 inch |
|||
|
Tank welding |
High frequency welding/Argon arc welding |
|||
Â
Working principle of solar water heater:
Compact non -pressure solar water heater relies on density of the water. The cold water and hot water circulate through the collector and water tank. When water in the collector is heated up,, it becomes lighter and naturally rises into the water tank. Meanwhile , cooler water in the tank flows to the collectors.
Â
| Established in 2005,， Inlight New Energy (Zhejiang)Co., Lid. is a professional manufacturer of domestic and com-mercial use solar heating system, with more than 18 years experience in this field. Our company is located in Haining city of Zhejiang province, close to Ningbo and Shanghai, very convenient trans-portation. Our company occupies an area of 10206m and Our annual production capacity is 300,000 sets per yearwith export license. Our company has introduced a series of advanced equipment including Numerical Control Turret Punch Press,Straight seam welding machine, Circumferential welding machine, Spot welding machine,Connector welding ma-chine, Single end pneumatic shrinking machine, air pressure fgrooving machine,Ten machine. lts products have been exported to more than 50 countrie till now, such as Russia, Romania, Uzbekistan, Australia,Kenya, Chile,Mexico etc and gain wide praises both domestic and abroad clients. |
Q: Why choose Galvanized Steel Solar Water Heater?
A: It is an environmentally friendly, efficient and economical choice. Using solar energy instead of fossil fuels to heat water can significantly reduce the carbon footprint. In addition, Galvanized Steel Solar Water Heater has low operating costs and significant long-term economic benefits.
Â
Q: What maintenance is required?
A: Periodic inspection is required to ensure that the surface of the solar panel is clean and free of obstructions. In addition, it should be ensured that the water storage tank is well sealed to avoid water leakage and evaporation.
Â
Q: What Is Your MOQ?
A: 1 sets
Â
Q: What Is Your Packing?
A: LCL order/Sample order in wood cartoon
Full container order in high quality export carton
Â
Q: What Is Your FOB Port?
A: We accept FOB Shanghai, Ningbo,Zhapu etc.
Â
Q: What Is Your Monthly Production Capacity?
A: 6000 sets
Â
Q: What Is Your Shipping Term?
A: By Sea/Air/Rail
Â
Â
http://www.inlightsolar.com/